wood charcoal making machine
wood charcoal making machine Description
Wood carbon making machine is a new type of environmentally friendly equipment, which can help customers solve the problem of carbonizing wood into charcoal and carbon powder. Charcoal making machine is the most advanced equipment of our company and the leading carbon making equipment in the industry.
Charcoal making machine produces charcoal in an environmentally friendly way. Only one worker is needed to operate the whole process. It is controlled by PLC and has a high degree of automation, which saves labor costs for customers.
Secondly, we use a flue gas purification system to filter the flue gas generated during the carbonization process through our system and turn it into pure combustible gas to heat the furnace again. We have a special treatment method for this part, which can not only treat the flue gas, but also separate and utilize the wood tar and wood acetic acid generated during the carbonization process, and completely purify and filter the flue gas.
Wood charcoal making machine can also be customized according to the actual situation of the customer.
Charcoal Making Machine SALE
Model | Diameter(mm) | The drum length(m) | Host RPM(revolutions per minute) | Carbon capacity(kg/h) | Power(kw) | Dimension(m) |
DLTJ1210 | 1200 | 10 | 2-5 | 200-300 | 40-50 | 11*2.0*2.8 |
DLTJ1410 | 1400 | 10 | 2-4 | 400-500 | 50-70 | 11*2.2*3.0 |
DLTJ1612 | 1600 | 12 | 2-4 | 600-800 | 70-80 | 11*2.5*3.3 |
DLTJ1912 | 1900 | 12 | 2-3 | 900-1100 | 90-110 | 13.5*2.8*3.6 |
DLTJ2212 | 2200 | 12 | 2-3 | 1200-1500 | 110-130 | 13.5*3.0*4.0 |
Model | Inner layer diameter(mm) | Outer layer diameter(mm) | The drum length(m) | Carbon capacity(kg/h) | Power(kw) | Dimension(m) |
DLTJ1610/2 | 1000 | 1600 | 10 | 600-800 | 40-50 | 11*2.0*2.8 |
DLTJ1810/2 | 1200 | 1800 | 10 | 700-1000 | 50-70 | 11*2.2*3.0 |
DLTJ2010/2 | 1400 | 2000 | 10 | 1100-1300 | 70-80 | 11*2.5*3.3 |
DLTJ2312/2 | 1600 | 2300 | 12 | 1500-2000 | 90-110 | 13.5*2.8*3.6 |
DLTJ2512/2 | 1800 | 2500 | 12 | 2200-2500 | 110-130 | 13.5*3.0*4.0 |
DLTJ2912/2 | 2200 | 2900 | 12 | 2500-3000 | 130-150 | 13.5*3.5*4.5 |
DLTJ3212/2 | 2500 | 3200 | 12 | 3200-3800 | 160-180 | 13.5*3.8*5.0 |
DLTJ3612/2 | 2900 | 3600 | 12 | 4000-4500 | 200-230 | 13.5*4.2*5.5 |
Charcoal Making Machine Working Principle
The carbonization machine adopts the advanced technology of recovery, purification and circulating combustion of carbon monoxide, methane, ethane and other combustible gases produced in the process of carbonization. It solves the problem of environmental pollution caused by thick smoke which produced by ordinary carbonization furnace in the carbonization project, and solves the heat energy problem required by the equipment, fully realizes self-sufficiency, and improves the continuity and economy of the equipment We should make full use of the agricultural and forestry residues to turn waste into treasure and contribute to the greening environment.
wood charcoal making machine FAQ
Branches, straw, rice straw, peanut shells, trunks, cotton straw, tea seed shells, fruit shells, weeds, leaves and other raw materials containing biomass fibers that can produce charcoal. These raw materials are crushed, dried, pressed and carbonized, and finally become machine-made charcoal.
Plants with high carbon content such as wood chips, bamboo chips, rice husks, straw, husks, tree roots, bark, leaves, etc. These raw materials are also suitable for new charcoal machines, with the advantages of fast carbonization, high output and low power consumption.
Crushing: crush the raw materials into powder within 10mm.
Drying: dry the crushed raw materials until the moisture content is within 12%. Molding: put the dried raw materials into the rod making machine and press them into charcoal rods under high temperature and high pressure. Carbonization: put the charcoal rods into the carbonization furnace for high temperature dry distillation and carbonization, and finally become machine-made charcoal.